{"id":444,"date":"2019-03-20T20:54:22","date_gmt":"2019-03-20T20:54:22","guid":{"rendered":"http:\/\/doperobot.com\/wordpress\/?p=444"},"modified":"2023-11-05T16:19:26","modified_gmt":"2023-11-05T16:19:26","slug":"roland-tb-3-extended-features-parameter-recall","status":"publish","type":"post","link":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/","title":{"rendered":"TB-3 Extended Features & Parameter Recall"},"content":{"rendered":"
A Nice Surprise: The TB-3’s Hidden Features<\/h5>\n

\"\"<\/a>As it turns out, the Roland Aira TB-3 is much more than meets the eye. When it first came out, it was a simple TB-303 emulator with 4 knobs, a touchpad with x\/y\/pressure control, and a built-in step sequencer. Then in 2014, Roland released an extended sysex document and firmware update (1.10) that allowed you to access more features, including control over a limited VCO section, distortion, and the two effect slots, as well as a 16-slot user patch storage section. If this weren’t enough, it was recently discovered that using an undocumented sysex control method it was possible to access 11 separate sections plus the sequencer, all controlled with midi. These are not novel uses of the effects, these are completely new sections:<\/span><\/p>\n

    \n
  1. VCO<\/strong> independently control sine, square, saw, ring + pink\/white noise<\/li>\n
  2. VCF<\/strong> with ADSR envelope, amount, accent & keyfollow<\/li>\n
  3. VCA<\/strong> with ADSR<\/li>\n
  4. LFO<\/strong> modulates VCO, VCF, VCA with 5 shapes including S&H<\/li>\n
  5. Cross Modulation\u00a0<\/strong>8 types combining square, saw, and noise sources<\/li>\n
  6. Ring Modulation\u00a0<\/strong>4 mod\u00a0shapes, separate from FX 1&2<\/li>\n
  7. CV Offset\u00a0<\/strong>inputs to SAW, SQR, RING, LFO<\/li>\n
  8. Distortion\u00a0<\/strong>25 types with Drive, Bottom, Tone & wet\/dry mix<\/li>\n
  9. Effect 1\u00a0<\/strong>8 \u00a0types + Pitch Shifter & EQ<\/li>\n
  10. Effect 2\u00a0<\/strong>8 types + Reverb<\/li>\n
  11. Parameter Assign<\/strong>\n
      \n
    1. allows assigning of any parameter to X or Y pad, press modulation, or effect knob with 0-255 value range<\/li>\n
    2. all known parameters can be assigned (\u00b1256)<\/li>\n
    3. all four controllers can be assigned simultaneously<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n

      \"\"<\/a>WOW!<\/strong>\u00a0It’s like getting a whole new synth! The only envelope control available before was VCF decay, but now all four stages of VCF\/VCA are available and with the new additions you have total control over your sound, whether it’s long drones or staccato stabs, maybe even PWM. The crossmod feature is extensive, for example allowing the oscillators to play at different pitches, and ringmod is especially juicy. Parameter assign lets you control any of the 256 parameters with four selectable mod destinations, like the touchpad or effect knob. In addition, there is complete MIDI control over pattern parameters and portamento types\/amounts. With pattern control, you could even write your own software to generate random or semi-random values for the pattern sequencer, although I have not tried editing patterns yet. Finally, you can set and receive the machine’s midi channel and modes remotely.<\/span><\/p>\n

      Still In Search of Parameter Recall<\/h5>\n

      What I had set out to do at the beginning still wasn’t possible though, which was to back up sounds\/patches, not to be confused with pattern<\/em> backup, which was already possible.\u00a0The sysex document<\/a>\u00a0provided with the 1.10\u00a0 firmware update indicated that the patch, distortion, and fx1\/2 sections were available for edit, a great improvement over the front panel alone. I had succeeded in getting a response from the synth as to the current values, but of course there were often many more unavailable parameters that were altering the sound that couldn’t be retrieved.<\/p>\n

      Then I started looking for editors on the internet to see if anyone else had taken snapshots or otherwise used the synth’s data to populate a visual interface. (Most people would have tried this first, but not me!!) I found one and viewed the sysex data in use and I immediately noticed it used a different, undocumented format and this led me to the\u00a0TB-3 unofficial MIDI spec<\/a>\u00a0which maps out all the known parameters. I emailed him to ask about these undocumented sysex calls and when he answered he detailed what each of the commands returned. For those that are interested, here are the RQ1 commands:<\/p>\n

        \n
      1. VCO<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0F0 41 10 00 00 7B 11 10 00 08 00 00 00 00 0E 5A F7<\/li>\n
      2. VCF<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 F0 41 10 00 00 7B 11 10 00 0A 00 00 00 00 0B 5B F7<\/li>\n
      3. VCA<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 F0 41 10 00 00 7B 11 10 00 0C 00 00 00 00 05 5F F7<\/li>\n
      4. LFO<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0F0 41 10 00 00 7B 11 10 00 00 00 00 00 00 0D 63 F7<\/li>\n
      5. Cross Mod<\/strong>\u00a0 \u00a0 \u00a0 F0 41 10 00 00 7B 11 10 00 04 00 00 00 00 0A 62 F7<\/li>\n
      6. Ring Mod<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0F0 41 10 00 00 7B 11 10 00 06 00 00 00 00 0E 5C F7<\/li>\n
      7. CV Offset<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0F0 41 10 00 00 7B 11 10 00 02 00 00 00 00 06 68 F7<\/li>\n
      8. Distortion<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 F0 41 10 00 00 7B 11 10 00 0E 00 00 00 00 09 59 F7<\/li>\n
      9. Effect 1\u00a0<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 F0 41 10 00 00 7B 11 10 00 10 00 00 00 00 5F 01 F7<\/li>\n
      10. Effect 2<\/strong>\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 F0 41 10 00 00 7B 11 10 00 12 00 00 00 00 54 0A F7<\/li>\n
      11. Param Assign<\/strong> F0 41 10 00 00 7B 11 10 00 14 00 00 00 00 12 4A F7<\/li>\n<\/ol>\n

        If you send the TB-3 these 11 commands, the machine will spit out all the information it contains in sysex format, and the data the TB3 returns can be recorded. When played back they will load into any location’s edit buffer, user or preset, but will not overwrite any sounds. Program change isn’t even necessary because you are just overwriting the location’s edit buffer. Create a named folder for each new patch and now\u00a0 you have all the information you need to recall a patch’s full parameters. Even though I didn’t technically find patch storage, I found the next best thing — complete parameter recall!<\/p>\n

        Paradise Gained<\/h5>\n

        \"\"<\/a>Now you sound designers out there don’t have to settle for a stock preset or worry about overwriting one of your precious 16 user slots. With all these parameters you can seriously mangle a sound, and once you get your main patch designed, use the extensive Equalizer from FX 1 and reverb or delay from FX 2 to add the finishing touches for your mix. Other ideas include using 3 separate ring modulations, dual delays, crossmod into pitch shift\/phaser, the possibilities are practically endless, but whatever you come up with, you can save them all to recall for a later session. No longer is the TB-3 just a desktop toy playing preset sounds, it can be a powerful workhorse in your studio. This is now a top-notch machine that I can’t wait to explore and design on.<\/p>\n

         <\/p>\n

        Download the Request file here:<\/h4>\n

        TB-3 REQUEST PROGRAM<\/a><\/h2>\n","protected":false},"excerpt":{"rendered":"

        A Nice Surprise: The TB-3’s Hidden Features As it turns out, the Roland Aira TB-3 is much more than meets the eye. When it first came out, it was a simple TB-303 emulator with 4 knobs, a touchpad with x\/y\/pressure control, and a built-in step sequencer. Then in 2014, Roland released an extended sysex document […]<\/p>\n","protected":false},"author":3,"featured_media":612,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-444","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"yoast_head":"\nTB-3 Extended Features & Parameter Recall - Dope Robot<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"TB-3 Extended Features & Parameter Recall - Dope Robot\" \/>\n<meta property=\"og:description\" content=\"A Nice Surprise: The TB-3’s Hidden Features As it turns out, the Roland Aira TB-3 is much more than meets the eye. When it first came out, it was a simple TB-303 emulator with 4 knobs, a touchpad with x\/y\/pressure control, and a built-in step sequencer. Then in 2014, Roland released an extended sysex document […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/\" \/>\n<meta property=\"og:site_name\" content=\"Dope Robot\" \/>\n<meta property=\"article:published_time\" content=\"2019-03-20T20:54:22+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-11-05T16:19:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.doperobot.com\/howtodoperobot\/wp-content\/uploads\/2019\/09\/XFUC8795.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"720\" \/>\n\t<meta property=\"og:image:height\" content=\"1278\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Dope Robot\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Dope Robot\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/\"},\"author\":{\"name\":\"Dope Robot\",\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/#\\\/schema\\\/person\\\/2da60149726657c3a00431760d40372c\"},\"headline\":\"TB-3 Extended Features & Parameter Recall\",\"datePublished\":\"2019-03-20T20:54:22+00:00\",\"dateModified\":\"2023-11-05T16:19:26+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/\"},\"wordCount\":922,\"commentCount\":17,\"image\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/wp-content\\\/uploads\\\/2019\\\/09\\\/XFUC8795.jpg\",\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/\",\"url\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/\",\"name\":\"TB-3 Extended Features & Parameter Recall - Dope Robot\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/wp-content\\\/uploads\\\/2019\\\/09\\\/XFUC8795.jpg\",\"datePublished\":\"2019-03-20T20:54:22+00:00\",\"dateModified\":\"2023-11-05T16:19:26+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/#\\\/schema\\\/person\\\/2da60149726657c3a00431760d40372c\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/wp-content\\\/uploads\\\/2019\\\/09\\\/XFUC8795.jpg\",\"contentUrl\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/wp-content\\\/uploads\\\/2019\\\/09\\\/XFUC8795.jpg\",\"width\":720,\"height\":1278},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/2019\\\/03\\\/20\\\/roland-tb-3-extended-features-parameter-recall\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"TB-3 Extended Features & Parameter Recall\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/#website\",\"url\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/\",\"name\":\"Dope Robot\",\"description\":\"teach me how to Dope Robot\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/#\\\/schema\\\/person\\\/2da60149726657c3a00431760d40372c\",\"name\":\"Dope Robot\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/222f1467e8f02ec2541e5b1f0707565c5f266f7fc7f9dfc3a7048831f93fb515?s=96&d=monsterid&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/222f1467e8f02ec2541e5b1f0707565c5f266f7fc7f9dfc3a7048831f93fb515?s=96&d=monsterid&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/222f1467e8f02ec2541e5b1f0707565c5f266f7fc7f9dfc3a7048831f93fb515?s=96&d=monsterid&r=g\",\"caption\":\"Dope Robot\"},\"url\":\"https:\\\/\\\/www.doperobot.com\\\/howtodoperobot\\\/author\\\/dope-robot-2\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"TB-3 Extended Features & Parameter Recall - Dope Robot","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/","og_locale":"en_US","og_type":"article","og_title":"TB-3 Extended Features & Parameter Recall - Dope Robot","og_description":"A Nice Surprise: The TB-3’s Hidden Features As it turns out, the Roland Aira TB-3 is much more than meets the eye. When it first came out, it was a simple TB-303 emulator with 4 knobs, a touchpad with x\/y\/pressure control, and a built-in step sequencer. Then in 2014, Roland released an extended sysex document […]","og_url":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/","og_site_name":"Dope Robot","article_published_time":"2019-03-20T20:54:22+00:00","article_modified_time":"2023-11-05T16:19:26+00:00","og_image":[{"width":720,"height":1278,"url":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-content\/uploads\/2019\/09\/XFUC8795.jpg","type":"image\/jpeg"}],"author":"Dope Robot","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Dope Robot","Est. reading time":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#article","isPartOf":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/"},"author":{"name":"Dope Robot","@id":"https:\/\/www.doperobot.com\/howtodoperobot\/#\/schema\/person\/2da60149726657c3a00431760d40372c"},"headline":"TB-3 Extended Features & Parameter Recall","datePublished":"2019-03-20T20:54:22+00:00","dateModified":"2023-11-05T16:19:26+00:00","mainEntityOfPage":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/"},"wordCount":922,"commentCount":17,"image":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#primaryimage"},"thumbnailUrl":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-content\/uploads\/2019\/09\/XFUC8795.jpg","inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/","url":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/","name":"TB-3 Extended Features & Parameter Recall - Dope Robot","isPartOf":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#primaryimage"},"image":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#primaryimage"},"thumbnailUrl":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-content\/uploads\/2019\/09\/XFUC8795.jpg","datePublished":"2019-03-20T20:54:22+00:00","dateModified":"2023-11-05T16:19:26+00:00","author":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/#\/schema\/person\/2da60149726657c3a00431760d40372c"},"breadcrumb":{"@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#primaryimage","url":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-content\/uploads\/2019\/09\/XFUC8795.jpg","contentUrl":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-content\/uploads\/2019\/09\/XFUC8795.jpg","width":720,"height":1278},{"@type":"BreadcrumbList","@id":"https:\/\/www.doperobot.com\/howtodoperobot\/2019\/03\/20\/roland-tb-3-extended-features-parameter-recall\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.doperobot.com\/howtodoperobot\/"},{"@type":"ListItem","position":2,"name":"TB-3 Extended Features & Parameter Recall"}]},{"@type":"WebSite","@id":"https:\/\/www.doperobot.com\/howtodoperobot\/#website","url":"https:\/\/www.doperobot.com\/howtodoperobot\/","name":"Dope Robot","description":"teach me how to Dope Robot","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.doperobot.com\/howtodoperobot\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.doperobot.com\/howtodoperobot\/#\/schema\/person\/2da60149726657c3a00431760d40372c","name":"Dope Robot","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/222f1467e8f02ec2541e5b1f0707565c5f266f7fc7f9dfc3a7048831f93fb515?s=96&d=monsterid&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/222f1467e8f02ec2541e5b1f0707565c5f266f7fc7f9dfc3a7048831f93fb515?s=96&d=monsterid&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/222f1467e8f02ec2541e5b1f0707565c5f266f7fc7f9dfc3a7048831f93fb515?s=96&d=monsterid&r=g","caption":"Dope Robot"},"url":"https:\/\/www.doperobot.com\/howtodoperobot\/author\/dope-robot-2\/"}]}},"_links":{"self":[{"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/posts\/444","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/comments?post=444"}],"version-history":[{"count":49,"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/posts\/444\/revisions"}],"predecessor-version":[{"id":1144,"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/posts\/444\/revisions\/1144"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/media\/612"}],"wp:attachment":[{"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/media?parent=444"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/categories?post=444"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.doperobot.com\/howtodoperobot\/wp-json\/wp\/v2\/tags?post=444"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}